Inflatable Toy
Inflatable Advertising
Inflatable Pool
Inflatable Tent
Interactive
Accessories
inflatable bouncer
inflatable castle
inflatable slide
inflatable fun city
inflatable tunnel
inflatable balloon
xmas inflatables
inflatable arch
inflatable air dancer
inflatable screen
inflatable cartoon
inflatable shape
inflatable pool
inflatable boat
inflatable sup
inflatable tent
obstacle courses
interactive inflatables
accessoriesHow to store, clean and maintain the inflatable castle
Some measures about clean and store the inflatable:
1st. Turning off the power, and then open the outlet and the blower’s interface. The time about gas emission is about 10 to 25 minutes. In addition, you should extrude it in order to release the gas left in it. If the water got in it because of the rain day, you must drain it out and then dry it.
2nd. When you clean it, you can use the washing powder to clean out the stains and grease on it, and then rinse it by using water. After drying by airing, it can be used in normal.
3rd. When you fold it, the bottom surface should be shielding the frontage. Then you can cover it with tarpaulin.
4th. The cleaning equip should be folded, bound and packed if it needn’t use in a long time. The perfect store temperature is about -50 to 40℃.
5th. Pay more attention to protect the blower from moisture and corrosion. And the inflatable equipment should be protected from rat and pest in bite.
The measures about maintain the inflatable castle:
1st. In order to ensure your equipment to reach normal using life, it is not admitted that too much kids play on it when open it. Generally, a kid can play on it at least 3 square meters.
2nd. some small shape on it is used to decorate so that pulling and tearing it is not admitted.
3rd. In order to avoid damage, child doodle on it with something hard can not be admitted.
4th. You can use the spare PVC material stick to the place damaged with the glue after the glue has taken effects. With suitable extrusion, the equipment can be used in several minutes.
5th. If the air pressure is not enough, you can check whether there is a puncture or a hole on it or power failure. Conversely, if the air pressure is too mush, you’d better shield the blower a little and then the equipment can work normally.
6th. If you find a large area of abnormal damage, you could enjoy the professional repair service supplied by our factory and you could sent it to our factory to repair.
