Inflatable Toy
Inflatable Advertising
Inflatable Pool
Inflatable Tent
Interactive
Accessories
inflatable bouncer
inflatable castle
inflatable slide
inflatable fun city
inflatable tunnel
inflatable balloon
xmas inflatables
inflatable arch
inflatable air dancer
inflatable screen
inflatable cartoon
inflatable shape
inflatable pool
inflatable boat
inflatable sup
inflatable tent
obstacle courses
interactive inflatables
accessoriesInflatable bouncer maintenance and repair methods
1. To keep the product cleanly, wipe with water regularly.
2. To keep the product drily. Water-proof, mainly to protect the stitching drily. In the rainy or wet weather.
3. Glued conditions: A. Air drying, B, the temperature above at 20 degrees.
4. Glue bonding method: A, To make the PVC repairing materials and the repaired materials clean and dry, B, Apply the glue on both parts evently and thin. C.when the glue become cold and white. press them together powerfully.
5.The stitching should be sewn firmly. once this the stitching break. it should be restitching again in time.
6.If the needle hole become big. The hole should be repaird to make it smaller in time.
7.If the toy have been using for a long time. some place was broken. it should be sew firstly and then use the glue to attached it.
8. Blower usage and maintenance method, please refer to the blower instruction
The article from http://www.pangoinflatable.com . We are good quality inflatable bouncer supplier from China.
